Axial Racing AX10 Deadbolt Aluminum Heatsink Motor Plate Upgrade - AX10-24015-OR by Jazrider  [AX10-24015-OR]

Aluminium Heatsink Motor Plate for AX10 Deadbolt

This aluminium motor plate includes a passive heatsink and is tailored for the Axial Racing AX10 Deadbolt chassis under model AX10-24015-OR. The orange anodised finish gives a scale look while the fin design helps move heat away from the motor mount during technical trail use.

Compatibility is centred on the AX10 Deadbolt motor bolt pattern. The plate is made to align with the AX10 Deadbolt mounting points; confirm your chassis bolt layout before fitting. It is an aftermarket hop-up for scale electric rigs rather than a component for full-size vehicles.

Installation involves removing the motor, keeping wiring clear, fitting the replacement plate to the chassis mounts, confirming motor-to-spur alignment, and refastening the motor while maintaining straight pinion engagement. Because the heatsink is passive, ensure fins are not obstructed by battery or ESC placement.

The plate helps stabilise motor position and provides modest passive cooling at the motor interface. For best thermal results use correct gear mesh, good ventilation, and motor/ESC settings matched to your setup.