Axial Racing AX10 Deadbolt Differential Protector Anodized Upgrade - AX10-24017-OR by Jazrider  [AX10-24017-OR]

Aluminum diff protector for AX10 Deadbolt chassis

This RC-scale aluminum protector fits over the differential case of the Axial AX10 Deadbolt chassis to divert impacts from the diff shell and provide a firm contact surface for rocks and obstacles.

Compatibility is limited to the AX10 Deadbolt family as described in the product title. The part ships in an orange anodized finish and is intended as a bolt-on reinforcement that does not change internal diff geometry.

Installation is simple: remove the chassis mounting screws that access the differential case, set the protector over the diff housing, and secure using the original mounting locations. Minimal trimming should be needed on a stock AX10 Deadbolt; verify screw lengths and thread engagement before tightening.

Functionally this protector does not alter gear ratios or internal diff tuning; it is a structural upgrade to reduce shell damage and help control minor chassis flex at the diff interface. Use in combination with skid plates or reinforced links for complete protection on rough trails.