Axial SCX-10 Honcho 115mm Front Lower Link Aluminium Upgrade - ASCX10-22473-GU by Jazrider  [ASCX10-22473-GU]

Axial Racing SCX-10 Honcho Aluminum Front lower Chassis Linkage 115mm (Gunmetal)
Price:
USD$8.83
Brand:
JAZRIDER
Model:
ASCX10-22473-GU
Condition:
Brand New
Write a review

Product role and basic summary

This front lower chassis linkage is an RC-scale 115mm aluminium replacement for Axial SCX-10 Honcho models, finished in gunmetal. It replaces the stock lower link to deliver a consistent pivot point for suspension and steering components.

Functionally it sets the lower-arm length and pivot positions, which play a key role in roll centre and steering behaviour on scale crawlers. Use as a direct replacement for the SCX-10 Honcho lower link and keep compatible factory hardware.

Fitting tips: check ball-end fit and mounting hole alignment before final tightening, lubricate pivot areas with an appropriate RC lubricant, and run through a full motion check. The aluminium build reduces flex relative to many plastics so plan minor tuning tweaks after installation.

What is the primary benefit of this aluminium link?

The main benefit is reduced flex compared with plastic links, which tends to give more predictable steering input and consistent geometry under load.

Are there special installation checks to perform?

Yes. Verify hole alignment, ensure ball studs seat correctly, lubricate moving parts, and test for any binding through the suspension travel range.

Will fitting this link require further tuning?

Usually only modest tuning is needed; reduced link flex can affect steering and traction, so adjust shock settings or link lengths gradually to dial in handling.