Axial SCX24 Brass Hex Hub Adapter +5mm Offset - JR-SCX2414-BK by Jazrider  [JR-SCX2414-BK]

Axial Racing SCX24 Brass Wheel Hex Hubs Adapter (+5mm Offset)(10g ea.)
Price:
USD$10.50
Brand:
JAZRIDER
Model:
JR-SCX2414-BK
Condition:
Brand New
Write a review

Brass Hex Hub Adapter for SCX24

This adapter fits the Axial SCX24 and is listed under part JR-SCX2414-BK. Manufactured from brass and recorded at 10g each in the product name, it supplies a fixed +5mm wheel offset per hub to change track and stance on 1/24 scale crawlers.

As a tuning accessory, it relocates the wheel mount outward to affect clearance and appearance without modifying drivetrain components. Expect differences in wheel-to-arch spacing and check for any need to swap hex screw lengths when using the offset.

Installation guidance: fit the adapter onto your existing wheel hex per the vehicle maker's fastening method, confirm concentric seating as you tighten, and spin the wheel to ensure there is no interference before running.

Will this fit Axial SCX24 wheels?

It is made for Axial SCX24 wheel hex interfaces; always confirm your wheel hex dimensions and screw lengths match the adapter prior to installation.

Does the +5mm offset need extra hardware?

You may require longer hex screws or altered fasteners to secure the wheel through the thicker offset; inspect fastener engagement after fitting.

Best way to check for binding after fitment?

After tightening, confirm concentricity and perform a slow spin test while observing for rubbing at the hub, wheel, and suspension clearances.