Axial SCX6 1/6 Knuckle Carriers & C-Hubs Aluminum Replacement JR-SCX602-RD by Jazrider  [JR-SCX602-RD]

Aluminum knuckle carrier and C-hub replacement kit

This aftermarket kit replaces the steering knuckle carriers and C-hubs on Axial 1/6 SCX6 Jeep models. The red aluminum pieces replace the factory plastic parts to give a firmer mounting platform for the steering knuckles and C-hubs, reducing flex and helping to keep steering geometry consistent during crawling and trail runs.

Parts are made for the Axial SCX6 1/6 Jeep chassis family and are offered as an upgrade option for hobbyists who want metal suspension components. Installation involves removing the stock carriers and C-hubs and installing the aluminum parts into the same mounting points; check full steering travel and alignment after installation to prevent binding.

In tuning terms, aluminum carriers change system stiffness and steering feel. Expect firmer response and less deformation under load, which can alter toe and caster during aggressive maneuvers. Carry out alignment checks and small adjustments to steering trim and suspension settings to accommodate the new components.

These aluminum carriers and C-hubs act as a resilient substitute for plastic stock parts on the Axial SCX6 1/6 Jeep range, reducing flex and supporting consistent steering geometry; confirm compatibility and inspect during fitting.