Axial Wraith 4WDS Conversion Upgrade - AW-23020 by Jazrider  [AW-23020]

Axial Racing Wraith Aluminum 4WDS Conversion Set
Price:
USD$44.90
Brand:
JAZRIDER
Model:
AW-23020
Condition:
Brand New
Write a review
alt="Axial Racing Wraith Aluminum 4WDS Conversion Set" title="Axial Racing Wraith Aluminum 4WDS Conversion Set"

AW-23020 Aluminum 4WDS Conversion for Axial Wraith

The AW-23020 conversion set provides an aftermarket route to convert qualifying Axial Wraith chassis into a 4WDS setup using aluminum replacement parts. The kit targets improved driveline rigidity through direct part-for-part swaps where alloy components replace stock items.

Confirm compatibility with your specific Wraith model before fitment since the kit is designed for frames that match its mounting geometry. Changes to driveline layout can influence suspension and handling characteristics.

Installation guidance: the conversion replaces selected mounting points and link interfaces and typically requires disassembly of the drive sections affected. Align components carefully, check clearances and ensure correct thread engagement to prevent binding or accelerated wear.

Tuning considerations: aluminum components reduce compliance in the driveline and alter traction feedback. Incorporate this conversion into a wider tuning routine covering axle articulation, gear mesh and damper settings for the intended terrain.

Specifications

  • Item: Axial Wraith Aluminum 4WDS Conversion Set
  • Material: Aluminum
  • Model Number: AW-23020
  • Compatibility: Axial Wraith

A suitable option for modelers pursuing a stiffer 4WDS driveline on an Axial Wraith; carry out careful test-fitting and follow-up checks post-installation.

How do I confirm my chassis will accept this conversion?

Measure your chassis mounting points against the kit's layout and review the parts that will be replaced. If mounting patterns align you are likely compatible.

Will fitting AW-23020 require driveline reinforcement?

The stiffer components can transfer higher loads; inspect driveshafts and joints and upgrade if they show signs of stress under the new loads.

What is the best practice for initial setup after installation?

After fitting, set gear mesh correctly, check axle articulation and run a short test to monitor noises or binding. Re-torque fasteners after the first run.

Does the kit include hardware or require reuse of stock fasteners?

Hardware inclusion varies by kit; be prepared to reuse suitable stock fasteners where they match the alloy parts, and replace any damaged or undersized screws.

What long term checks are recommended?

Regularly inspect fasteners, gear mesh and bearings, since alloy upgrades can shift loads and affect adjacent components over time.