Axial Yeti Chassis Linkage Aluminum YT-25006-BK by Jazrider  [YT-25006-BK]

Axial Racing Yeti Aluminum Chassis Linkage (Black)
Price:
USD$12.31
Brand:
JAZRIDER
Model:
YT-25006-BK
Condition:
Brand New
Write a review

Replacement Chassis Linkage for Axial Yeti

This chassis linkage is a scale replacement component intended for the Axial Yeti series, offered under the Jazrider YT-25006-BK identifier. It is manufactured from aluminium with a black anodised finish and replaces the stock parts that locate and brace the chassis on Axial Yeti models.

Fitting a solid aluminium linkage reduces flex at the mounting points and helps keep suspension geometry consistent under load, which many hobbyists prefer for precise tuning and repeatable handling. This makes it suitable for rock crawling and technical trail driving where predictable behaviour is valuable.

Installation mirrors the original procedure: remove the factory linkage and refit the replacement in the same mounting positions using the existing fasteners. Confirm thread and clearance condition before final torqueing and inspect the part regularly for deformation after heavy impacts.

How do I check if this will mount to my Yeti?

Compare the mounting hole spacing and orientation on your chassis to the stock Yeti linkage pattern; if they match, the replacement will mount correctly.

Is periodic inspection required?

Yes. Check for bends, thread wear and loose fasteners after sessions or impacts and replace the linkage if any structural damage is found.

Will this affect my suspension setup?

Expect reduced compliance at the link mounts, which can change how the suspension transfers load; retune springs and damping as needed to restore desired handling.