Axial Yeti XL Rear Upper Link Mount Upgrade - YTL-25005 by Jazrider  [YTL-25005]

Axial Yeti XL Aluminum Rear Upper Chassis Suspension Link Mount Set
Price:
USD$8.13
Brand:
JAZRIDER
Model:
YTL-25005
Condition:
Brand New
Available in shop
Write a review

Upper rear link mount set for Axial Yeti XL

An RC-scale rear upper chassis suspension link mount set intended for Axial Yeti XL applications, listed under the YTL-25005 code. The aluminium pieces function as replacement mounting points for the rear upper suspension links and provide a stiffer chassis attachment option.

The kit components are aluminium and are designed only to locate and secure the upper link geometry on the rear chassis section. During installation, align with the Yeti XL rear mount points and replace the original mounts in the same positions. Access normally involves removing the wheel and rear bodywork, then swapping the mounts while reusing the factory fasteners and link connectors.

Tuning role: these mounts aim to stabilise upper link positioning and reduce chassis-mount flex, aiding adjustments to roll centre and anti-squat that come from link-length and shock tuning. They do not change the link arms themselves but alter the chassis attachment points for the upper links.

Is special tooling required to fit these mounts?

No specialised tools are typically required; standard hex drivers and a torque-aware driver for final tightening are sufficient. Remove necessary bodywork to access the rear link area.

Will these mounts change how I should tune my shocks?

They can alter chassis stiffness at the upper link mounting points, which may lead you to revisit shock valving and spring rate to achieve the desired handling balance under the new, firmer attachment conditions.