HPI Bullet 3.0 MT/ST Alloy Shock Tower Set - BUL-18005-BK by Jazrider  [BUL-18005-BK]

HPI Bullet - Black (1pc) Alloy Front/Rear Shock Tower Set w/Body Mount
Price:
USD$14.40
Brand:
JAZRIDER
Model:
BUL-18005-BK
Condition:
Brand New
Write a review

Alloy shock tower upgrade

This RC-scale alloy front and rear shock tower set features an integrated body mount and is supplied as a single unit. Designed for HPI Bullet platform models listed as Bullet 3.0 MT and ST in parts catalogs, the machined alloy towers replace factory plastic mounts to offer a firmer mounting point for shock absorbers and body attachment while limiting additional weight.

The towers secure the top of the suspension assembly, help keep shock geometry consistent under load, and provide a stable anchor for the body mount. Confirm chassis compatibility with the Bullet 3.0 layout and check mounting hole alignment before installation. Use standard RC maintenance methods when removing stock components and fitting alloy parts to protect threads and hardware.

Fitting notes: install at the factory shock tower locations using the vehicle's original mounting points and hardware unless your chassis documentation indicates different fasteners. A stiffer mounting surface can affect shock feel slightly, so re-check damping and ride height after fitting.

What chassis checks should I perform before buying?

Verify your chassis follows the Bullet 3.0 MT or ST layout and ensure the tower mounting hole pattern matches the part listing to guarantee fitment.

Are replacement bolts needed when switching to alloy?

Most installations use the vehicle's existing hardware, but check your chassis manual and the seller's package contents to confirm if new fasteners are required.

How will alloy towers change vehicle setup?

Alloy towers provide a firmer shock mount that can modify shock response; after fitting, review damping and ride height settings to fine tune handling.