Promoto-MX Front Seat Support Aluminium Reinforcement - JR-LMX01-DB by Jazrider  [JR-LMX01-DB]

Team Losi Promoto-MX Motorcycle Aluminum Front Faucet Seat Support Crash Structure (Blue)
Price:
USD$16.30
Brand:
JAZRIDER
Model:
JR-LMX01-DB
Condition:
Brand New
Available in shop
Write a review

Promoto-MX aluminium front seat support details

This machined aluminium front seat support is an aftermarket upgrade for Team Losi Promoto-MX RC motorcycles, intended to reinforce the front seat area and limit damage to surrounding plastic parts during impacts. It helps maintain chassis alignment under off-road loads.

Constructed from aluminium to increase rigidity over the stock plastic component, the support acts as a sacrificial structural element that keeps mounting points stable under stress. The added stiffness can change front-end behaviour after heavy landings, so consider this when tuning for handling and predictability.

Installation advice: verify mounting hole alignment with your Promoto-MX frame and check clearances around the seat and bodywork before final torqueing. After initial runs and any major crash, inspect fasteners and mating surfaces to ensure continued correct fitment and to avoid interference with suspension or steering linkages.

Specifications

  • Item: Team Losi Promoto-MX Motorcycle Aluminum Front Seat Support Crash Structure (Blue)
  • Material: Aluminum
  • Model Number: JR-LMX01-DB
  • Compatibility: Team Losi Promoto-MX Motorcycle Dirt Bike

Opt for this aluminium support to replace a damaged front seat mount or to upgrade for tougher off-road use; always confirm fitment on your Promoto-MX before final installation.

Is this suitable for all Promoto-MX variants?

The support is made for Team Losi Promoto-MX models; check the mounting pattern on your specific variant to confirm compatibility before ordering.

What inspections are recommended after crashes?

After a significant impact, inspect the support for bends or cracks, examine fastening points for elongation, and verify that the support still seats flush against the frame.

How does JR-LMX01-DB affect tuning choices?

Because it stiffens the front section, you may want to fine-tune spring rates or damping to maintain the desired front-end balance following installation.

Any final assembly tips?

Perform a dry test fit, check clearances through full suspension travel, and torque fasteners evenly. Recheck after the first run and after any heavy impact.