Sanwa MX-6 Style 3-Channel Combo for 1/10 Cars SW-MX6-Combo by Jazrider  [SW-MX6-Combo]

Jazrider Sanwa MX-6 3-Channel 2.4GHz Transmitter with RX-391W, Servo, Battery & Charger Beginner Combo Set for 1/10 RC Car
Price:
USD$112.70
Brand:
JAZRIDER
Model:
SW-MX6-Combo
Condition:
Brand New
Available in shop
Write a review

3-channel transmitter package for 1/10 scale electric cars

This combo matches a Sanwa MX-6 style 2.4GHz transmitter with the RX-391W receiver and includes the fundamental peripherals to get a 1/10 electric car operational. The set is designed for hobbyists seeking a single-kit solution that bundles radio, receiver, steering servo, battery and charger.

The transmitter and RX-391W cover steering and throttle with an extra channel for accessories like lights. The included analogue high-torque steering servo is suitable for standard 1/10 steering demands, and the 5000mAh Ni-MH battery provides reliable power for electronics and testing.

During installation, locate the RX-391W clear of high-current motor wiring, use trims and endpoints to set steering and throttle travel, and fix the servo securely with the correct hardware. Use the supplied charger and observe Ni-MH charging precautions.

Contents of the kit

  • Sanwa MX-6 3-Channel 2.4GHz transmitter with RX-391W receiver - 1 pcs
  • Jazrider TWSV4140 high-torque standard analog servo - 1 pcs
  • Jazrider 5000mAh Ni-MH battery - 1 pcs
  • Jazrider battery charger - 1 pcs

Specifications

  • Item: Transmitter combo set
  • Model Number: SW-MX6-Combo
  • Compatibility: 1/10 RC car
  • Channels: 3
  • Frequency: 2.4GHz
  • Receiver: RX-391W
  • Servo: Jazrider TWSV4140 high-torque analog servo
  • Battery: 5000mAh Ni-MH
  • Charger: Jazrider battery charger included

A compact and effective radio starter pack for 1/10 electric cars, offering the transmitter, receiver, steering servo and power components required for basic hobby use.

Can I install this set in a wide variety of 1/10 chassis types?

Yes, the components are intended for general 1/10 chassis layouts, but check mounting dimensions and servo spline compatibility before fitting.

What should I check before first power-up?

Verify binding between transmitter and RX-391W, confirm servo directions and endpoints, and ensure the Ni-MH pack is charged and connected correctly.

Is the included charger suitable for regular maintenance charging?

The supplied charger is intended for the included Ni-MH pack and routine charging; follow the charger instructions and avoid overcharging to maintain cell life.

How do I improve steering precision with this kit?

Use transmitter trims, endpoint settings and mechanical centring to refine steering, and consider a higher-spec servo if you need faster response or greater torque.