Tamiya CC-02 Aftermarket Shock Towers Front & Rear - JR-CC203-LB by Jazrider  [JR-CC203-LB]

Tamiya CC-02 Chassis Aluminum Front/Rear Shock Tower (Blue)
Price:
USD$10.70
Brand:
JAZRIDER
Model:
JR-CC203-LB
Condition:
Brand New
Write a review

Aftermarket Aluminum Shock Tower for CC-02

This front and rear shock tower pair is produced for the Tamiya CC-02 chassis in blue anodized aluminum and sold as JR-CC203-LB. The aluminium units replace the standard plastic towers to provide a more rigid attachment for the shocks and to help maintain correct suspension geometry under load.

Installation follows the original CC-02 mounting pattern and uses standard fasteners. When fitting, confirm that the shock shafts operate smoothly and that mount bolts are tightened to avoid preload. Use thread-lock where metal-to-metal connections exist.

Because the towers stiffen the shock top, expect a crisper initial response and less lateral flex, which helps when running stiffer springs or different shock mounting setups. Adjust oil weight, springs, or mount positions as needed to refine handling.

Will this part void any warranties on the CC-02?

Aftermarket upgrades can affect warranty terms with some manufacturers; check your original product documentation or contact the kit manufacturer for their policy on third-party parts.

Is there any drilling or trimming required?

No modifications are normally required as the towers match the CC-02 factory hole pattern. Always trial-fit before final tightening to ensure correct alignment.

What tuning areas should I focus on after installing?

Prioritise checking shock oil viscosity and spring rates first, then experiment with top mount positions to compensate for the reduced flex at the shock top and achieve the desired handling balance.