Tamiya CC-02 Rear Lower Link Arms Upgrade JR-CC210-RD by Jazrider  [JR-CC210-RD]

Product Summary for CC-02 Link Arms

This rear lower link arm set suits the Tamiya CC-02 chassis and carries the model number JR-CC210-RD. The content outlines fitment points, installation guidance, and how the links affect suspension geometry and handling in scale trail and crawler applications.

Fabricated from aluminium to replace factory plastic links, these components reduce deflection and help keep alignment under load. As an upgrade they shift rear axle position, roll center and anti-squat when used with the CC-02's stock mounts and turnbuckles. Always note your current setup before making multiple linkage changes so you can track handling differences.

Installation notes: these arms mount into the CC-02 rear suspension points with standard hardware. Confirm thread types and ball stud orientation prior to fitting to prevent mismatches between front and rear parts. After installation, carry out a static alignment check and a short low-speed run to verify axle and driveshaft clearances.

Maintenance and tuning: aluminium links are less prone to bending but can transfer higher shock inputs to adjacent plastic pivots and mountings; inspect fasteners and pivot points after initial testing. Adjust link angles and lengths in small steps and pair with damper and ride-height adjustments for a balanced setup.