TAMIYA DF-01 Aluminum Front Suspension Arms Upgrade - JR-DF101-RD by Jazrider  [JR-DF101-RD]

Tamiya DF01 Top Force/ Manta Ray Aluminum Front Suspension Arms (Red)
Price:
USD$12.80
Brand:
JAZRIDER
Model:
JR-DF101-RD
Condition:
Brand New
Available in shop
Write a review

Product Brief: DF-01 Aluminum Front Arms

The JR-DF101-RD front arm set replaces plastic A-arms on TAMIYA DF-01 1/10 scale buggies with machined aluminum parts intended for improved durability and repeatability during setup and repair. The red anodized finish provides corrosion resistance and easy visual identification.

Designed for DF-01 models such as Top Force and Manta Ray, these arms reduce front-end flex relative to stock plastic components, which can translate into sharper steering feedback and a firmer suspension characteristic preferred for certain track conditions.

Installation is standard: remove wheel and hub, transfer ball studs or pins from factory arms, and fit the aluminum arms using the original hardware. Verify suspension geometry and range of motion before final tightening, and apply threadlocker on metal-to-metal screw joints where recommended.

Refer to compatibility and exclusions for your specific vehicle before fitting to ensure proper match and to avoid interference with other aftermarket parts.

Compatibility

  • Compatible with Tamiya 1/10 RC Buggy DF-01 chassis: Top Force, Top Force Evolution, Manta Ray, Terra Conqueror, Blazing Star, Dirt Thrasher.
  • Not suitable for Tamiya RC Cayenna (58406) and Racing Lancer (58421).

Do I need new hardware to mount these arms?

In most cases the original fixings are reused; transfer ball studs or pins from the old arms and check screw engagement in the aluminum mounts.

Will the aluminum arms require different setup settings?

Because aluminum arms reduce flex, drivers may adjust toe, camber or shock rates slightly to restore the balance they prefer; small iterative changes are advised.

How should I inspect these arms after a crash?

Check for visible bends, hairline cracks around mounting holes, and thread damage. Replace any arm that shows structural compromise to maintain safe handling.