TAMIYA DT-03 C Hub (Anodized Aluminum) JR-DT304-GR by Jazrider  [JR-DT304-GR]

Tamiya DT-03 Aluminum C Hub (Green)
Price:
USD$10.45
Brand:
JAZRIDER
Model:
JR-DT304-GR
Condition:
Brand New
Available in shop
Write a review

Aftermarket Aluminum C Hub for DT-03

This aluminum C hub is designed for TAMIYA DT-03 chassis assemblies and replaces the stock C hub at the front steering knuckle. The anodized green finish gives a metal option for users seeking improved durability over the original plastic component.

The hub is compatible only with DT-03 based setups. Installation involves removing the original C hub from the knuckle and fitting the aluminum unit with existing hardware, then checking fit, orientation, and clearance before final torque. Because this is a metal replacement, ensure there is no contact with adjacent suspension or steering components after installation.

For tuning, an aluminum C hub provides a firmer mounting point for the steering knuckle, which can change steering feedback and suspension behaviour. Inspect wheel hexes, steering linkage, and wheel bearings when swapping to maintain geometry and avoid binding.

Can I fit this hub using the original DT-03 screws?

In most cases the original fasteners are suitable, but confirm thread engagement and replace any damaged screws to secure the aluminium hub properly.

Will the aluminium hub change on-track behaviour?

Yes, the stiffer mount can tighten steering response and alter handling; small setup adjustments may be necessary to achieve the desired balance.

Is this a direct replacement for stock DT-03 hubs?

It is intended as a direct replacement for DT-03 steering assemblies, but always verify fitment and clearance on your specific build before final assembly.