Tamiya TL-01 C Hub Aluminum Replacement Light Blue - TL01-13306-LB by Jazrider  [TL01-13306-LB]

Aluminium C Hub for TL-01/GF-01/WR-02 Chassis

This aluminum C hub is an RC-scale replacement created for direct fitment on Tamiya TL-01, GF-01, and WR-02 chassis. The light blue finish marks the metal alternative to the stock plastic hub and offers a solid mounting surface for steering knuckles and lower suspension links.

Purpose: the C hub locates the steering knuckle and lower link attachment points. Fitting a machined aluminium hub improves suspension geometry repeatability and mounting stability during setup and tuning and is intended as a like-for-like replacement for the listed chassis types.

Installation notes

• Remove the original hub from the knuckle assembly and transfer any necessary bushings or shims before installing the aluminium unit.
• Check screw lengths and thread engagement during installation to avoid interference with the steering knuckle or bearings.
• After fitting, verify wheel alignment and suspension travel, then adjust toe and camber as required.

Tuning considerations

• An aluminium C hub can provide more consistent bearing seats and reduced flex versus plastic, which may change steering feedback and cornering feel.
• When tuning, retest with identical tyre and shock settings to assess the hub's effect on handling balance.