TAMIYA TL-01/GF-01/WR-02 Direct-Fit Front Upper Suspension Arm JR-TL100-BK by Jazrider  [JR-TL100-BK]

Tamiya TL-01/GF-01/WR-02 Aluminum Front Upper Suspension Arm (Black)
Price:
USD$6.50
Brand:
JAZRIDER
Model:
JR-TL100-BK
Condition:
Brand New
Available in shop
Write a review

Direct-fit aluminium replacement for TAMIYA upper link

This aluminium front upper suspension arm is a scale replacement designed specifically for TAMIYA TL-01, GF-01 and WR-02 chassis. It replaces the factory plastic arm to give a consistent mounting point for the steering knuckle and upper suspension link.

Intended role: use the arm when you require a firmer upper pivot for tuning, improved repeatability in camber and toe, or reduced flex in demanding setups. The part is for chassis tuning and setup adjustments only.

Installation notes: remove the stock arm and move any required bushings or pins across to the new part. Verify clearance at the steering knuckle and shock tower and ensure the servo saver and drive components do not interfere. Tighten mounting hardware to a firm setting and inspect fastener security periodically.

Tuning tips: introduce aluminium arms gradually into your setup and make small incremental changes to toe and camber, testing between adjustments. Because aluminium stiffens the upper mount, review shock valving and spring choices to maintain balanced handling.

Will this arm fit standard TL-01 steering assemblies?

Yes, it is made for TL-01/GF-01/WR-02 upper arm geometry. Always compare the new arm to your steering knuckle and tower before finalising the installation.

Are replacement bushings needed for this upgrade?

Often you can transfer existing bushings and pins, but if they are worn or do not match the new arm, replace them with correct-size parts for reliable operation.

Does the arm affect cornering and feedback?

Aluminium increases stiffness at the upper mount which can sharpen steering response and change feedback. Adjust setup settings stepwise to achieve the desired handling characteristics.