JAZRIDER JR-TT101-LB Light Blue Aluminium Front Upright Knuckle Arms for Tamiya TT01E/TT01ED  [JR-TT101-LB]

Tamiya TT01E / TT01ED Aluminum Front Upright Knuckle Arms (Light Blue)
Price:
USD$11.61
Brand:
JAZRIDER
Model:
JR-TT101-LB
Condition:
Brand New
Available in warehouse
Write a review

Practical aluminium uprights for Tamiya TT01E platforms

The JAZRIDER JR-TT101-LB knuckle arms provide a direct replacement for TT01E and TT01ED front uprights. Manufactured from aluminium to improve pivot rigidity, these uprights reduce flex at the steering mount and extend service intervals compared with standard plastic parts.

Upgrade benefits for everyday hobbyists

These uprights give a more secure steering pivot and help retain alignment under normal to demanding driving. They are intended for hobby use where reliability and straightforward fitment are priorities.

Fitment and workshop notes

JAZRIDER designed the JR-TT101-LB to fit the stock locations on Tamiya TT01E and TT01ED. Installation uses the existing mounting points and typically requires only common RC tools. After installation, check for smooth steering travel and re-torque fasteners following the first sessions.

Do these uprights need specific bearings or seals?

They are designed to work with the stock bearings and seals used on the TT01E/TT01ED. Replace worn bearings when fitting for best results.

Any recommended checks after installation?

Verify steering rotation is free, confirm there is no binding at full lock, and re-tighten hardware after a short run to ensure everything is seated correctly.

Are replacement parts available if a knuckle is damaged?

Check with the supplier or JAZRIDER dealer for spare knuckle arms or repair options. Keeping spare hardware and bearings is good practice for quick field repairs.