Tamiya TT01E/TT01ED Aluminum Steering Upgrade JR-TT103-RD by Jazrider  [JR-TT103-RD]

Tamiya TT01E / TT01ED Aluminum Steering Set (Red)
Price:
USD$17.42
Brand:
JAZRIDER
Model:
JR-TT103-RD
Condition:
Brand New
Available in shop
Write a review

Aluminum steering upgrade for TT01E/TT01ED platforms

This JR-TT103-RD steering set is intended for Tamiya TT01E and TT01ED chassis. The kit replaces factory plastic steering parts with anodized red alloy components to increase mount stiffness and minimise steering flex during normal driving and track sessions.

Supplied as a direct-replacement assembly, the alloy components fit the existing TT01E/TT01ED mounting points and aim to stabilise steering geometry and improve repeatable trim performance without changing the vehicle's inherent handling characteristics.

Installation guidance: inspect steering linkages and ball joints before installing, re-centre the servo horn after fitment, and confirm transmitter end points to ensure neutral and full-range travel. This product is intended as an aftermarket upgrade for 1/10 touring chassis maintenance and tuning.

Specifications

  • Item: Tamiya TT01E / TT01ED Aluminum Steering Set (Red)
  • Material: Aluminum alloy
  • Model Number: JR-TT103-RD
  • Compatibility: Tamiya TT01E / TT01ED

Install JR-TT103-RD to replace worn plastic steering hardware and preserve consistent steering alignment and trimming on TT01E/TT01ED 1/10 touring cars.

Do these parts fit straight onto a stock TT01E?

Yes, JR-TT103-RD is produced to match the stock TT01E steering mounts and installs without modification on standard chassis.

Will alloy steering improve lap consistency?

By reducing flex and slop in the steering linkage, the alloy parts can help deliver more consistent steering inputs and repeatable trim, which supports lap-to-lap consistency.

Are special fasteners needed when swapping parts?

The set is designed to use existing chassis fasteners in most cases. Replace any worn screws or connectors if they no longer secure the new alloy parts properly.

Is extra maintenance required after fitting?

Routine checks of ball joints, linkages, and finish condition are recommended. Keep joints free of grit and re-torque mounting screws after initial running.