TRX-4 Front Steering Servo Mount - JR-TRX410-GU by Jazrider  [JR-TRX410-GU]

Traxxas TRX-4 Aluminum Front Steering Servo Mount (Gun Metal)
Price:
USD$9.29
Brand:
JAZRIDER
Model:
JR-TRX410-GU
Condition:
Brand New
Write a review

Front Steering Servo Mount for TRX-4 Chassis

This gun metal aluminium front steering servo mount is designed as a metal substitute for the stock plastic servo mount on Traxxas TRX-4 platforms. It reduces deformation under the low-speed steering loads encountered in scale and trail crawling.

The mount secures a standard servo at the front axle while matching the steering link geometry typical of TRX-4 style crawlers. It gives a stable mounting reference so the servo can maintain consistent steering input during technical driving.

Installation is familiar to TRX-4 owners: remove the original servo mount, position the aluminium mount against the chassis bosses, and reuse the existing screws where they fit. Always check horn alignment and linkage sweep before operating the model.

Consider the mount part of a tuning package: using a rigid mount together with a suitable servo and careful geometry adjustments will reduce slop and aid repeatable steering; the mount itself does not alter servo torque or speed.

Will this fit my TRX-4 without modification?

In general, yes. It is shaped to match TRX-4 mounting points, though you should inspect for clearance with your chosen servo and any other aftermarket parts.

What maintenance does the aluminium mount need?

Minimal maintenance is required; clean off grit and check fasteners periodically to ensure nothing has loosened after trail use.

Does the mount require servo re-tuning?

No major re-tuning is necessary, but you may want to fine tune centring and end stops since the firmer mount can reveal existing play in linkages or servo mounting.